• Date:2022-12-6 18:22:46
  • Posted By : admin
  • views

What Are The Precautions For Injection Mold Production?

① Shorten the opening stroke of the injection mold to the minimum necessary so that the parts and runners fall off;

② Exclude any factors that make ejection difficult, such as the flashing edge around the ejector pin.

③ shorten the ejection stroke to the necessary minimum;

④ Use the fastest mold opening and closing speed, and at the same time, stop and close appropriately to prevent damage to the injection mold;

⑤ Look for any delays in mold closing and clamping pressure, which indicate failure of mechanical or hydraulic valves;

⑥ A large number of insert activities in the injection mold also increase the opening time of the injection mold. A little consideration of product design (reduction of undercuts) can often make the ejection action automatic or semi-automatic;

⑦If the delay is caused by the loss of the injection mold, the mold should be repaired to reduce the delay;

⑧ Developing good operating habits of injection molding machines is of great benefit to improving machine life and production safety.

Heya focuses on manufacturing all kinds of plastic moulds, like household molds, kitchenware molds, home appliance moulds, industry and agriculture molds, crate mould, chair moulds, injection pallet molds and so on, stool molds, table moulds and so on.If you have new mould projects, welcome to contact us!