Heya is good at manufacturing various plastic bucket mould which has a variety of capacities. Plastic bucket mould series includes paint bucket mould, water bucket mould and so on.

The eccentric of the plastic bucket mould easily cause the barrel of uneven thickness. How to make a high-quality plastic bucket mould?

1. In general, the Buick lock height of the plastic bucket height is 20% -30%. smaller barrel is 20% and bigger bucket mould should be about 30% height.

2. If the cooling water at the regional in the core and cavity of plastic bucket mould the flow is uneven, will cause the plastic melt flow difference, the more cold-regional mobility would be smaller, the hotter the regional mobility will be even greater, so that the heat point region of the sides of casks will be a little thick. Under normal circumstances, different temperatures will cause at least a tolerance of 0.05mm.

3. When we do the core cavity processing of barrel moulds, we should pay special attention to the selection of processing equipment.